BigShot ABY™ Features & Specifications

The BigShot ABY is a simple passive switcher that enables the guitarist to reroute the signal between two amplifiers using a simple mechanical switch. This true-bypass design delivers straight wire performance between the input and the output thus resulting in near perfect signal transfer. A built-in isolation transformer may be inserted into the signal path to help eliminate hum and buzz caused by ground loops. The frequency response of the transformer is dependent on the input buffer that is being applied to the signal path.

Specifications are subject to change without notice.
Circuit Type: Passive, true bypass
Frequency response: 20Hz - 20KHz
Gain: -.3db
Phase response: <1 degree
Switching: 100% passive
Output-A: Direct output
Output-B: Switchable transformer isolated or direct output
Tuner output: Always-on ¼" jack
LED indicators: Large 3mm OD ultra-bright LED's
Ground Lift: Lifts ground at Output-B
Polarity reverse: 180° (phase) reverse at Output-B
ISO switch: Engages isolation transformer on Output-B
Power Supply: 9VDC, center pole negative
Construction: 14-gauge steel
Finish: Durable powder coat
Size: 3.6"w x 3.9"l x 2"h
Shipping Size: 4.25"w x 6.25"l x 3"h
Weight: 1.25 lb (0.56 kg)
Shipping Weight: 1.55 lb (0.70 kg)
Conditions: For use in dry locations only between 5°C and 40°C
Production: Made in Canada
Warranty: Radial 3-year, transferable
Click to view larger