PhazeQ™ Specifications

The Radial PhazeQ is a device that must be listened to as the specifications truly mean very little. This is because each frequency has a different wavelength and properly phase-aligning all frequencies is impossible. In other words, as you bring one frequency in phase, the next will be shifted. So what specs are important? Noise, maybe the dry frequency response… maybe the smoothness of the phase curves. But beyond that, you will have to use your ears to judge how the PhazeQ works.

Click images to view larger

PhazeQ Specifications  
Specifications are subject to change without notice.
Circuit type Discrete Component Class A
Frequency response 20Hz~20KHz
Dynamic range 102dB
Noise - dry -90dB below 0dBu
Noise - wet -80dB below 0dBu
Maximum output +17dBu
THD+N - dry >0.002% @1kHz (0dB input, 100k load)
THD+N - wet >0.015% @1kHz (0dB input, 100k load)
Intermodulation distortion >0.015% @ -12dBu out
Input impedance 3.4K Ohms
Output Impedance 110 Ohms
Phase shift: 0º ~ 180º - frequency dependent
181º ~360º when invert switch is engaged
Low pass filter Range 1: 300Hz ~ 3.8kHz
Range 2: 3kHz ~ 38kHz
Omniport Dry Signal, Balanced Output, +15dBu
Power requirement 50mA
Shipping size 9 x 6.5 x 2 (inches)
Weight 1.5 lbs. (0.7 kg)
Conditions: For use in dry locations only between 5°C and 40°C
Warranty 3 Years, Transferable
Click to view larger