PRESS RELEASE

RELEASE:
CONTACT:
DATE:
IMMEDIATE
PETER JANIS peterjanis@radialeng.com
OCT 2, 2003
Radial JPC Professional Direct Box for Computers

Vancouver BC: Radial Engineering is pleased to to announce the release of the Radial JPC Direct box, a two channel DI that has been specifically designed for use with computer sound cards, consumer electronics, audio visual post systems, and electronic media.

The Radial JPC is a ‘best of both worlds’ hybrid active direct box that employs 48V phantom powering while providing passive isolation transformers at the input. This combination ensures problems such as ground loops are eliminated while driving long runs with less than ideal input signal can be accomplished.

According to Custom Shop Manager Steve Hopia: “Many of our best customers are the large integrators and touring houses. These folks regularly interface computers and video into their productions and have been asking us for an easy solution to their many interfacing challenges. Although our Radial JDI and JDI Duplex can often provide a cure, the need for a more affordable interface with a multitude of connector options was obvious. The real magic was being able to cram two channels of both active and passive circuitry into such as small package. This makes deployment easy and a natural fit inside the AV technicians tool kit.

The Radial JPC features both 1/4” and 1/8” stereo ring-tip-sleeve inputs, as well as two stereo sets of RCA inputs. Any of the input connectors may be used as thru-puts should a signal split be required. A –15dB input pad assures hot signals will not overload the JPC.

On the output panel, features include two balanced XLR mic level outputs and ground lift switch to further reduce opportunity for hum and buzz caused by ground loops. The Radial JPC derives its power from 48V phantom eliminating the need for batteries.

The Radial JPC is housed in a 14-gauge, I-Beam steel frame with an innovative book-end cover and durable powder coat finish. These combine to ensure the JPC is never exposed to outside stress that could cause cold solder joints while providing the switches and jacks with maximum protection against damage. For more permanent installations, the JPC may be rack-mounted using the Radial J-Rak rack shelf.

For more information, contact Radial Engineering:1638 Kebet Way, Port Coquitlam, BC V3C 5W9. Tel: 604-942-1001 Fax 604-942-1010

Visit www.radialeng.com for Radial product reviews, images and information.


Click image to view larger

Download hi-rez image (1mb)

Copyright 2002 JP CableTek Electronics Ltd.  1638 Kebet Way, Port Coquitlam, BC V3C 5W9
Toll Free: 1.800.939.1001 | Tel: 604.942.1001 | Fax: 604.942.1010 | www.radialeng.com | Top