Headload Prodigy™ Specifications

The Headload Prodigy is a device that is intended to simulate the sound of a guitar cabinet and allow the user to reduce the sound level by 50% on stage or perform without noise in the studio. That said, the following specifications do not provide any truly significant information as it is completely dependent on the amplifier and speaker cabinet in use. As such, we ask you to please review with the awareness that these measurements are truly subjective in nature.

Headload Block Diagram
Headload Frequency Response
Click to enlarge
Specifications   
Audio Circuit Type:  Passive attenuation circuit with active equalization
Frequency response: Shaped to emulate a classic guitar cabinet
Gain: -30dB/-42dB
Noise floor: -106dBu
Maximum input: 130 watts continuous
Total harmonic distortion:  0.05%
Intermodulation distortion:  0.05%
Input / output impedance:  8 Ω speaker load
Output level - max - 1KHz:  +17dBu
Output level - max - 20Hz:  +14dBu
Features   
Gain reduction: 100%, 50%, 0%
Equalization:  Low EQ: +/- 9dB @ 80Hz
High EQ: +/- 9dB @ 6KHz
Headphone output:  400mW into 32 Ω
Unbalanced line out:  Hi-Z 1/4", pre or post EQ
Balanced line out:  250 Ω post EQ
Ground lift:  Disconnects pin-1 at the XLR input
General   
Power:  Radial +/-15V 400mA power supply
Construction:  14 gauge steel chassis & outer shell
Finish: Durable powder coat
Size: (L x W x H) 10.25" x 5,9" x 3.75" (260.3 x149.7 x 95.2mm)
Weight:  5.3lbs (2.4kg)
Shipping size: (L x W x H) 14.5" x 8.75" x 4.75" (368.3 x 222.2 x 120.7mm)
Shipping weight: 6.5lbs (2.9kg)
Conditions: For use in dry locations only between 5°C and 40°C
Warranty:  Radial 3-year, transferable
Specifications are subject to change without notice.
4