J33™ Specifications

The Radial J33 is a combination stereo phono preamp and direct box designed for dynamic cartridges. Careful attention has been paid to delivering a smooth sounding RIAA transfer curve while keeping noise down to the absolute minimum for the noise-prone world of 33 RPM long-play records. Both unbalanced consumer line level and balanced mic level outputs are supported.

Specifications  
Specifications are subject to change without notice.
Audio circuit type: Active circuit
Frequency response: RIAA response curve for phonographic playback
Signal to noise ratio: -82dB below 0dBu Output
Dynamic range: 91 dB
Equivalent input noise: -82 dBu @ 0 dBu output
Maximum input: -30 dBu @ 1kHz
Nominal Input: -50 ~ -40 dBu @ 1kHz
Total harmonic distortion: 0.002% @ 1kHz (-33 dBu input level)
Inter-modulation distortion: 0.025% @ -45 dBu input
Input impedance: 47k Ohms, unbalanced
Voltage gain: +37.8dB
Output impedance: XLR out: 600 Ohms; ¼", 3.5mm, RCA outs: 470 Ohms
Features  
LED power LED:: Two indicators illuminate when power is applied
Low-Cut filter: -3dB @ 100Hz (rumble filter)
XLR configuration: AES standard (pin-2 hot)
General  
Construction: 14 gauge steel chassis and outer shell
Finish: Durable powder coat
Size: Size: 5" x 6.25" x 2" (127 x 159 x 51mm)
Weight: 2.80lbs (1.28 kg)
Power: +48V phantom or +15VDC/400mA external supply (included)
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable
Click Here for Graph Guide
Click to view larger graphs