Snakes
A great snake design must be backed with quality manufacturing, or it simply will not make it through a tour. Examine any Radial product and you will notice that we don’t cut corners. Radial snakes use machine screws and Nylocks to secure connectors, not pop rivets. Our stage boxes are made from 14 gauge cold rolled steel. Proper soldering should never be taken for granted because the labor is a large part of what you are paying for. We do not crimp without first soldering, and every ground wire is insulated to protect against short circuits. Finally, before a product goes out the door, we test it individually for phase continuity and audio clarity.
 
       
       
 

For the Convertible V12 we cast off the conventional methods of building a large format mic snake and adopted a rackmount modular design. This allows the snake to be reconfigured and added to as your needs change.

...more »


24 to 64 channels, 12RU
Multi-pin sub-snake options
Multi-pin output options
Cross-patching options
       
 

The Convertible 50-10 is a 50 channel rackmount snake system. It's basic configuration is 50 channels with the last 10 inputs paralleled to both male and females XLR connectors for dual use. This allows the channel format to be easily switched from 50 x 0, to 40 x 10.
...more »



40 to 50 channels
Up to 10 return channels
Multi-pin output options
Monitor split options
       
 

The rackmount Roadster RX is a professional snake system in an economical format. The RX features a high density input panel with room for up to 50 XLR connectors. The output panel is designed to accommodate multi-pin connectors for split outputs and sub-snakes inputs. Typical configurations include:
28 x 8; 32 x 8; 48 x 8; 50 x 0
...more »


24 to 50 channels
Up to 10 return channels
Multi-pin output options
Monitor split options
       
 

A highly customizable concert snake. The TX features a low profile stage box, and high density input panel with room for up to 50 XLR connectors. The output panel can accommodate two multi-pin connectors or hardwired outputs. Typical configurations:
24 x 4; 28 x 8; 30 x 6; 32 x 10; 36 x 6; 40 x 8.
...more »



       
 

A compact, rugged and cost-effective stage snake. The Roadster SX is a great choice for clubs, schools and corporate shows where durability and performance are a must. Available configurations:
8 x 4; 12 x 4; 16 x 4; 24 x 4.
...more »


8 to 24 channels
4 return channels
Compact stage box
Radial Torsion cable

       
 

A series of six ultra-compact snakes from 6 to 16 channels. Some models include 2 to 4 return channels. Use as a sub-snake for large systems, or as a main snake for portable PA.
...more »



       
 

The Radial StageBug is a compact and tough 12 channel snake suited for sub-snake duties. It may be ordered with a fanout of XLR's or multi-pin connectors.
...more »




       
 

The Radial StageSlug is a low profile 12 channel sub-snake ideal for front line inputs where clean looking cabling is important. Optional ‘flow through’ design to second StageSlug for cross-stage setups.
...more »




12 ch low profile sub-snake
Flow through channel design
Side mounted connectors
Multi-pin option
       
 

Designed to fit within a mixer road case or inside a "doghouse" the DogSled can be fitted with V-Lock (Veam) or Mass multi-pin connectors with up to 64 channels.
...more »


Veam or Mass multi-pin
Bundled XLR breakouts
EZ mounting flange
Compact, fits in mixer case
       
 

Snake cables made with Radial Torsion premium multi-pair cable and popular multi-pin connectors. Snakes may be ordered to match Radial snake heads or be specified to interface with your current inventory.
...more »



Veam, Mass, CPC, Ramlatch
Standard Pin-outs
Low capacitance multi-pair
Custom fanout available
     
Radial Engineering © 2016 1588 Kebet Way, Port Coquitlam, British Columbia, V3C 5M5 CANADA 604 - 942 - 1001, Fax 604 - 942 - 1010