Roadster RX Information Menu

» Specifications Sheet
» Photos
» Transformer Isolation Options
» Snakes & Breakout Cables


Up to 50 inputs in an 11RU rackmount package
Custom configurable input and output panels
Optional transformer isolation
Up to 3 multi-pin outputs, Veam, Mass, Ramlatch
Multi-pin sub-snake options
Extra heavy duty welded 14 gauge steel construction

The Roadster RX provides a compact and professional snake system in an economical 19” rackmount format. The Roadster RX is designed for professional touring, theatres, and broadcasters looking for a 28 to 50 channel snake with plenty of sub-snake and split output options.

The Roadster RX consists of a 19" rack frame with two configurable front panels and a back box with a third rear facing panel. The RX frame is 19" tall (11RU) and the back box is 5.25" deep. Each panel may be configured in an endless variety of ways. This is what makes the Roadster RX one of the most flexible snake systems available.

Typically, the top panel is configured with male and female XLR connectors and the lower as a multi-pin connector panel for sub-snake inputs and split outputs. The rear panel may be used when a rear cable exit is desired, like when the RX is wall mounted, or when installed in a cable case.

Typical Channel Configurations:
50 x 0, 40 x 10, 32 x 8,

Please call or email our Custom Shop sales center to discuss options for the Roadster RX snake.

Available Options:

Multi-pin outputs - Veam, Mass or Ramlatch connectors.
Hard-wired outputs - front or rear exit for the main or monitor snakes.
Sub-snake inputs - up to four multi-pin inputs for 12 channel sub snakes.
Ground lift switches - lifts pin 1 between main and split output.
Transformer isolation
- Jensen transformers.
Rear output panel - configurable with any type of connector or output.
Little Chief road/cable case combo.

Radial Engineering © 2016 1588 Kebet Way, Port Coquitlam, British Columbia, V3C 5M5 CANADA 604 - 942 - 1001, Fax 604 - 942 - 1010

Dear valued Radial Engineering Customer,
Please be advised that the Radial Custom Shop is no longer taking new orders, the page(s) you are about to view contain only legacy products. While the Custom Shop division is no longer active, Radial Engineering offers its full commitment to the 3-Year limited warranty on products currently in the marketplace.