Q: Can I use the HotShot ABi to switch condenser microphones?
A: You could try, but due to the powering of the mics, you could encounter a pop when switching depending on the grounding. Always test at very low system volumes if you chose to use the ABi for these types of mics.

Q: Can I use the HotShot ABi to select between two direct boxes?
A: If the direct boxes are passive, this will work perfectly. If the direct boxes are active, you could encounter popping depending on how they are powered. Always test at a low volume before using in this manner.

Q: Can I use the HotShot ABi with two electric guitars?
A: You could, but the BigShot ABY is better suited for this as high-impedance guitar signals work best with hi-impedance coaxial cable.

Q: Why are there no LEDs on the ABi?
A: It is always a matter of price and value. We felt that providing greater control over levels and potential noise problems due to grounding were more important than adding a powering circuit for an LED indicator. With only two output choices, we felt adding the LED was for the most part, not a justifiable added cost.