»
Product details
» Product FAQ
» User manual pdf
» Product sheet pdf
» Press & images
HotShot™
DM1 stage mic toggle
Radial
HotShot™DM1 - order # R800 1500
Suggested
retail: $100 USD
On-stage
mic mute and signal redirector Momentary
switch for one-push operation Allows
discreet communication with band and crew Ground
lift to eliminate buzz caused by ground loops Toggle
to second mic channel with or without effects
The HotShot™DM-1 is an innovative a combination
microphone signal splitter and mute switch that
allows the user to depress a foot switch to mute
his mic and redirect the signal to the monitoring
system or intercom for on-stage communication with
band-mates and technicians.
Designed specifically for dynamic microphones, the
DM-1 HotShot is a simple passive device that features
an XLR input, momentary foot switch and two XLR
outputs designated 'main' and 'monitor'. The microphone
connects to the input and the main output connects
to the sound system as usual. The monitor output
is connected to the monitor desk where the monitor
engineer can route the signal to the musicians on-stage
monitoring systems and if desired, to the technical
crew. Should a problem occur—a change of song
during a set or a level that requires adjustment—the
vocalist need merely depress his HotShot foot switch
and he is now able to communicate this discreetly.
As with all Radial stage switchers, the HotShot
DM1 is designed to take the abuses of the road with
it's rugged 14-gauge steel construction, baked enamel
finish, heavy-duty isolated XLR connectors and switch.
Application
diagram(s) hnot avilable
Please check back later
HotShot™
DM1 Setup:.
Sorry, this information not available at
this time.
