JR1 Remote
Locking XLR and ¼” combo jack used to connect the Radial JR1 Remote footswitch. The Relay Xo powers the JR1 Remote LED indicators to provide local visual feedback.
Remote Link
1/4" link output used to expand switching to additional Relay Xo units.
14-Gauge Steel
I-beam enclosure makes it impossible to torque the PC board.
Mic/Line Input
Balanced XLR input for microphone or any other audio source. Features locking XLR connector.
Output-B
Alternate balanced XLR output. This output is active when the select switch is pressed inward or when a remote switch is closed.
No Slip Pad
This provides electrical isolation and plenty of ‘stay-put’ friction to keep the Relay Xo in place.
Output-A
Main balanced XLR output. This output is active when the switch is in the outward position or when a remote switch is open.
Cable Clamp
Prevents accidental power disconnection by locking down the AC adapter cable.
Power Jack
Connection for the included 15 volt (400mA) AC power adapter.
Output Select
This switch toggles the Relay Xo’s outputs. Two LED indicators display which output is active.
Ground Lift
Disconnects pin-1 (ground) on the input XLR jack to help reduce hum and buzz caused by ground loops.
