Output
¼” jack connects to your amplifier.
Footswitch 2
Turns Loop-2 on and off.
Loop-2 LED
Indicates Loop-2 is active.
Loop-2 Mute
Converts Loop-2 into a mute function to allow silent tuning.
Loop-2 Lift
Reduces ground loop hum by disconnecting the ground at the Return-2 jack.
Loop-1 Lift
Reduces ground loop hum by disconnecting the ground at the return-1 jack.
Loop-1 LED
Indicates Loop-1 is active.
Footswitch 1
Turns Loop-1 on and off.
Send
¼” output jack for the first effects loop.
Return
¼” input jack for the first effects loop.
Send
¼” output jack for the second effects loop.
Return
¼” input jack for the second effects loop.
PSU
Connection for 9-12 volt DC (center pin negative)
Connectors
Glass filled nylon housing is tougher than steel and provides isolation for reduced noise. Nickel silver contacts will not tarnish.
14-Gauge Steel
Prevents circuit board from being torqued which could lead to part failure.
Extra Durable Switches
Switches with metal outer casing are rated at over 20,000 cycles for added durability.
Mil-Spec PCB
Full ground plane for noise free performance. Double sided through hole solder points for durability.
Footswitch
Heavy duty 9 pole footswitches control signal flow and LED indicators.
