Close

Cherry Picker Specifications

The Cherry Picker is a ‘straight wire’ switcher that lets you to compare up to four preamps using a single microphone. This balanced interface employs high performance gold contact sealed relays and is void of any buffering whatsoever. This results in distortion levels that are below measurement, zero phase shift at all audio frequencies and a linear performance that is equivalent to a solid piece of wire. The external power supply is used to control the relays, power the LEDs and generate 48V phantom power.

Specifications
Audio circuit type: Passive signal path with active relay switching
Frequency response: 10Hz to 40kHz
Dynamic range: >115dBu
Gain: 0.0dB – Unity gain device
Total harmonic distortion: 0.0003%
Intermodulation Distortion: 0.001%
Phase Deviation: < 0.001 degrees at all frequencies
Input Impedance: 10k Ohms
Common Mode Rejection Ratio: -97dB @55Hz
Equivalent Input Noise: -115dB
Maximum Input: +26dBu
Maximum Output: +26dBu
Features
Ground lift, Phantom Power
Input Connectors: Balanced XLR female
Output Connectors: 4 x XLR male
General
Construction: 14 gauge steel chassis & outer shell
Size (L x W x D): 4.5" x 2" x 6" (121 x 64 x 147mm)
Weight: 2.8 lb (1.3kg)
Shipping size (L x W x D): 4.75" x 2.5" x 10.75" (121 x 64 x 273mm)
Shipping weight: 3.05 lb ( 1.4kg)
Power: +15V DC/400mA power supply included
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable

Cherry Picker Resources

Part no: R800 1442 00