Inst
1/4" unbalanced instrument input to feed the DI side of the Reamp Station.
Thru
1/4" output passes the instrument signal through to feed an amplifier for recording or monitoring.
Buffer
Engages a unity gain buffer on the Thru output to avoid loading down passive pickups on your instrument.
Pad
-15dB pad reduces the input sensitivity for connection to high-output instruments like an active bass.
48V LED
Indicates that the Reamp Station is receiving 48V phantom power to operate the direct box features. Not needed for operation of the Reamp circuit.
Mute
Cuts signal to the 1/4" Amp Out when Reamping. Does not affect the direct output.
Filter
3-position switch applies a high-cut, low-cut, or flat frequency response to the 1/4" Amp Out and tailor the Reamped tone as needed.
Level
Controls the signal level to the 1/4" Amp Out for optimal gain-staging through amplifiers and effects pedals.
3.5mm Input
Allows mobile devices to feed the Reamp Station to play though amplifiers or pedals. Automatically sums left and right channels to mono.
Link In / Out
Balanced 1/4" connections that allow the Reamp Station to daisy-chain to other Reamp devices to feed multiple amplifiers simultaneously.
Reamp In
1/4" TRS balanced input for connecting line-level outputs from audio interfaces to the Reamp Station.
Amp Out
1/4' TS unbalanced output for feeding Reamped signals to amplifiers and effects pedals.
Reamp In
XLR balanced input for connecting line-level outputs from mixers or pro audio playback devices to the Reamp Station.
Lift
Disconnects the ground pin at the Reamp inputs and the direct output to remove buzz and hum due to ground loops.
180°
Reverses the polarity at the direct output to compensate for amps or effects that reverse the phase of the signal.
Direct Out
Mic-level XLR output to feed a copy of your instrument signal to a mic preamp or audio interface for recording.
