The Radial 15V Switching power supply is designed for use with 15V Radial products and comes with multiple adaptors to connect to outlets in the USA, Europe, the United Kingdom, and Australia.
Our 15V power supply is designed for use specifically with our JX44 Guitar Signal Manager.
Our 15V Radial power supply provides power to most Radial and Tonebone products that do not require a standard 9V power source.
Our Radial universal 5 pin power supply is designed for use with Workhorse power racks and rackmount Radial products that require a higher level of current for operation.
Our Radial universal 4 pin power supply is designed for use with many of our Workhorse power racks and rackmount Radial products.
The SB-5 Bracket allows you to permanently affix the SB-5 to a desktop or inside a rack.
Headload Rack Adapter
The Headload Rack Adaptor may be used to mount the Headload load box into a standard 19” equipment rack.
The Radial SB-48 is a phantom power generator that creates a stable 48 volt supply for active direct boxes and condenser microphones.
The WM8 adds the convenience and functionality of a mixing section to Radial WR-8 500 series power racks.
ThumbSet Screws allow you to easily mount 500 series modules in Workhorse Power Racks without the need for a screwdriver. Set of 12 screws and washers.
Duo filler panels cover two unused 500 series slots and protect your power racks from dust and other contaminants.
Solo filler panels cover unused 500 series slots and protect your power racks from dust and other contaminants
SixPack Rack Adapter
The SixPack Rack Adaptor allows the SixPack 500 series power rack to be mounted in standard 19″ rack enclosures.
The SA series rack adapter is a dual function angle bracket that may be used to mount one or two Radial SA series devices.
The J-Rak 8 allows you to mount up to eight Radial DIs in standard 19″ equipment racks for touring or permanent installation.
The J-Rak 4 allows you to mount four Radial DIs in standard 19″ equipment racks for touring or permanent installation.
The P-Clamp replaces the outer shell of smaller Radial boxes such as the ProDI and the SGI, allowing you to permanently affix them to a desktop or inside a rack.
The J-Clamp replaces the outer shell of full-sized Radial DI boxes such as the JDI and J48, allowing you to permanently affix them to a desktop or inside a rack.
The Radial BigShot SW2 is a dual output remote control with choice of latching or impulse settings to control two amplifiers or effects.
The Radial JR-5 is a multi-switch remote control designed for the Radial JX44 Air Control wireless guitar and stage amp switcher.
The JR1-M is a single action momentary footswitch designed to remotely control a function such as selecting A or B outputs.
The Radial JR1-L is a single action footswitch designed to remotely control a function such as selecting A or B outputs.
The Radial JR-2 is an innovative remote control that is equipped with two footswitches – designated as MUTE and AB select.