Close
SB-6 Specifications
The SB-6 is a passive isolator that has been designed to work with both balanced and unbalanced signals. As detailed in the graphs below, the SB-6 is exceptionally linear throughout the audio range and exhibits nearly flawless phase shift even in the lower registers. Very low distortion from -40dB to +10dB makes the SB-6 ideally suited for instruments, consumer audio devices and pro-balanced audio signals, while the compact size makes it easy to integrate in just about any situation.
Specifications
Block Diagram
Graphs
| Specifications | ||
|---|---|---|
| Audio circuit type: | Passive Transformers | |
| Transformer: | Eclipse Custom | |
| Frequency response: | 20Hz-20KHz +/-1db | |
| Dynamic range: | >140db | |
| Gain: | -2dB | |
| Total harmonic distortion: | <0.0008% @ 1kHz | |
| Phase Deviation: | >5° @ 30Hz | |
| Input Impedance: | Varies with Load/47K | |
| Output Impedance: | 600Ω | |
| Maximum Input: | >+25dBu | |
| Features | ||
| Input pad, 180° polarity reverse, Ground lift | ||
| Input Connectors: | 1/4" TRS | |
| Output Connectors: | 1/4" TRS | |
| General | ||
| Construction: | 14 gauge steel chassis & outer shell | |
| Size (L x W x D): | 3.92" x 2.54" x 1.7" (100mm x 65mm x 43mm) | |
| Weight: | 0.9 lbs (408 grams) | |
| Shipping size (L x W x D): | 8" x 5" x 3" (203mm x 127mm x 76mm) | |
| Shipping weight: | 1.0 lbs (453 grams) | |
| Power: | Passive, no power required | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
| Warranty: | Radial 3-year, transferable | |
Frequency Response
What do these graphs mean? Learn what to look for and why it matters.
Learn More
