The Radial MR5 is a MIDI signal translator that allows you to use a MIDI controller to drive the JX44, JX42 and other Radial products that use the JR5 footswitch.
Headload Rack Adapter
The Headload Rack Adaptor may be used to mount the Headload load box into a standard 19” equipment rack.
The JR2-DT is a desk-top version of the JR2 featuring two top-mounted activator switches to control AB and Mute functions.
The Radial StageDirect is a state-of-the-art active direct box designed for musicians who require extra control when they are on stage.
The Decoder is a microphone preamp and Mid/Side stereo matrix that allows the user to easily create M/S recordings without having to re-configure a recording console.
The StageBug SB-7 is a passive headphone level controller that allows you to turn off one side of the headphones when recording in the studio.
The WM8 adds the convenience and functionality of a mixing section to Radial WR-8 500 series power racks.
The Radial WR-8 is an 8-slot power rack that lets you load up to eight 500 series modules. Can be expanded with the WM8 mixer for full Workhorse capabilities.
The Radial Tossover is a 500 series frequency divider that lets you separate and process low and high frequencies separately via fully variable controls and slopes.
The Submix is an ultra-quiet 4×1 mixer module that allows you to simultaneously combine multiple audio feeds such as line level devices, studio effects, or instruments such as keyboards or drum machines.
The ChainDrive is an innovative 1×4 distribution module designed to send any audio signal to multiple processers, effects, or remote audio systems simultaneously.
The Shuttle is a combination effects insert and routing module, allowing you to connect and audition two separate effects loops and route them to the mix buss of a Workhorse 500 series rack.
The JDX-500 is a 500 series guitar amplifier interface that allows you to capture the tone of a guitar amp and cabinet without the need for a microphone.
The Radial PreComp is a 500 series channel strip that combines a state-of the-art preamp with a full-function VCA compressor for dynamic control over the signal.
The Radial BigShot SW2 is a dual output remote control with choice of latching or impulse settings to control two amplifiers or effects.
The Radial PreMax is a 500 series channel strip that combines a state-of-the-art preamp with a 3-band EQ for easy signal manipulation in post production and recording.
The Radial Q4 is a 500 series state-variable, 100% discrete class-A parametric EQ that brings character and warmth to your recordings with minimal artifact.
The Q3 is a 500 series induction-coil EQ that brings the character and excitement of an old-school vintage EQ to your recordings with over 1700 equalizer curves.
The JDV-Pre is a 500 series instrument preamp designed specifically to capture the natural tone and distinct character of the instrument.
The PhazeQ is an analog phase alignment tool designed to work with any 500 series rack, allowing you bring two sound sources together so that the fundamentals play in sync.
The PowerStrip is a 3-slot power rack for 500 series modules, designed to create a compact channel strip with 500 milliamps of available current.
Space Heater 500
The Radial Space Heater 500 is a studio-grade tube distortion for the 500 series format.
The Komit is a streamlined dynamics processor that combines a super-clean compressor circuit with an old school diode-bridge clipping limiter, for creative tone shaping with maximum flexibility.
The Radial Powertube is 500 series 100% discrete class-A preamp with high voltage 12AX7 tube gain stage and transformer coupled input for vintage character.
The Radial PowerPre is a 500 series 100% discrete mic preamp with Accustate input control for low noise and transformer coupled output for added warmth.
The Radial Firefly is a class-A direct box that combines a 12AX7 tube drive with transformer isolation to deliver spectacular warmth and character.
The Radial mPress is a modular press box that can be expanded as needed to feed a community-sized press gallery or distribute audio for an international event.
The Radial JX44 Air Control is a wireless signal manager for concert stage that lets you remotely control 4 guitar inputs and 6 amp outputs at once.
The MC3 enables the engineer to easily select between two sets of reference monitors, a subwoofer or headphones to compare how the mix translates across a variety of playback systems.
The JX-42 is a compact guitar selector that lets you instantly switch between four guitars and two amps on stage.
The Radial JDV is a class-A direct box with a unique zero negative-feedback circuit that delivers unmatched signal purity for the most demanding recordings.
The Radial Workhorse is an 8-slot 500 series power rack with a built-in analog summing mixer, headphone amp and extensive patching capabilities.
The Headload is a combination load box and attenuator that is capable of handling up to 130 watts RMS of continuous power and peaks of 180 watts.
The Headload Prodigy™ is a combination load box and DI that lets you drive your guitar amp at a higher output in order to maximize the tone, yet produce a lower stage volume when needed.